YetAnotherConfigLib Download for Minecraft
Need YACL to start a mod? Match your Minecraft version and loader, download the JAR, then follow the steps for the profile you play.
Find my download
What is YetAnotherConfigLib?
YACL is a library that mod authors use to build settings screens. If a mod lists YACL as a dependency, install the matching release in the same game profile.
Think of the video settings in a map mod. The map author decides which controls you see. YACL gives the author a way to display them and save your choices. This is why you may first hear about the library when a different mod asks you to install it.

Check your Minecraft version
Open the installation you actually play and read its full game version. Keep the final number: 1.21 and 1.21.1 can have different compatible files.
Open the profile settings before you search. The launcher itself has a version number too, and that number describes the app on your computer. Write down the Minecraft number shown for the instance. For a snapshot, copy the whole identifier, including the snapshot suffix.



Identify your mod loader
Check the loader shown in your launcher profile. Use that name when choosing a release, even if another loader offers a file for the same game version.
Two profiles can run the same game version with different loaders. If you switch packs often, read the loader from the instance you plan to launch today. The download finder uses that choice to narrow the list of files. Keep the game and loader together when comparing results.
Choose a YACL fileDownload YetAnotherConfigLib
Choose your Minecraft version first. The loader and release lists will show compatible builds. If a mod requests a particular YACL version, pick it from the release list. Check the filename, then select Download JAR to save it.

Read the YACL filename
A release name can include the library version, game version and loader. Before installing, compare the supported versions on the release page with your profile.
For example, in a name ending in 1.21.1-fabric.jar, the final two parts identify a game version and loader. The library has its own version number earlier in the name. Leave the filename intact so you can recognise the build the next time you open the mods folder.

Check YACL requirements
Open the dependencies listed for your selected release. Check which entries are required, then compare them with the mods already in your profile.
Read the version range in the loader message. A minimum version means you can use that build or a later compatible one. If it gives an upper limit as well, stay within both limits. A newer library may still fall outside the range your mod accepts.

Install through your launcher
Open your instance in a launcher with a mod browser. Search for YetAnotherConfigLib, check the project by isXander, and install the release offered for that instance.
If the launcher asks where to install the file, pick the instance you checked above. Let the install finish, then look for YACL among that instance’s installed mods. This last check matters when two profiles share a similar name or use different copies of the same pack.

Install YACL manually
Open the game directory from your launcher profile. Place the downloaded JAR in its mods folder, leave the archive intact, then start that same profile.
Keep the JAR file as it arrived. Opening it with an archive tool can leave you looking at folders of code instead of the file you need to move. Once the copy is complete, return to your launcher and start the instance from which you opened the folder.

Verify your installation
Launch the game and check its mod list if available. You can also search the profile’s latest.log for YACL and confirm which version loaded.
A successful start is a useful first check. To test the feature you installed it for, open the dependent mod and visit its settings. If the game still closes, read the first error that names a mod or version. That message gives you a better starting point than reinstalling everything.


Use YACL with a modpack
Check the pack’s installed mods first. A pack may already supply the YACL release its mods expect. Keep any manual changes in a separate copy of the instance.
A modpack can pin a library to a particular build. If the pack worked before an individual update, compare your installed files with the pack’s published version. When testing a change, use a copy of the profile so you can return to the working set of mods.

Find the mod’s settings
Open the configuration screen for the mod that uses YACL. Its entry point depends on the mod, so check its description for the menu or key binding.
Look for the name of the mod whose behaviour you want to change. For example, to adjust a map display, start with the map mod’s options. Once you find its screen, change one setting and save it. Reopen the screen to check that your choice stuck.

Fix a missing dependency
Read the loader message for the required YACL version or range. Install a compatible file into the same instance as the mod named in the message.
Write down both names from the error: the mod making the request and the library it requires. In the finder, choose your game and loader first, then pick a release within the requested range. Restart the instance after adding the file so the loader can check the new set.

Fix a version mismatch
Compare the installed library version with the range in the error. Choose a release that also supports your exact Minecraft version and loader.
A mod can require a newer YACL build while your Minecraft version stays the same. Read the two version numbers as a pair: what the message requires and what the loader found. Changing the game version too soon can introduce a second mismatch with the rest of your pack.

YACL not detected
Use the launcher’s open-folder option to find the active instance. Check that the JAR is directly inside its mods folder and the profile starts with its mod loader.
Compare the path you opened in the launcher with the folder where you saved the file. Check for a JAR inside an extra folder or a file left in Downloads. If the launcher offers a switch for each installed mod, check that YACL is enabled in this instance.
Check the active profile
Update YetAnotherConfigLib
Close the game and back up the instance. Check the new release against your game, loader and dependent mods before replacing the previous YACL file.
Keep the previous file outside the active mods folder while you test the new one. Start the game, open the settings screen you normally use and check a saved option. Keeping the original file makes it easier to restore the earlier setup if a dependent mod rejects the update.

Find older releases
Use the download finder above to get an older YACL release. Select the Minecraft version and loader used by the pack, then open the YACL release list. It shows the newest matching build first.
For a pack that pins an exact build, match the full library number before downloading. If the number is missing, check whether you selected the right loader. A file published for Forge will not appear among the Fabric results unless its release lists both.
Choose an earlier release
Release notes
Read the changelog attached to the individual release. Look for changes relevant to your setup, such as a loader update or a fix for the settings screen you use.
Read the notes for the build you plan to install. A fix listed for one release may apply to a different loader or game branch from yours. The project’s release history is linked in the footer for reference. The download button above gives you the file itself.

Check your launcher profile
Before pressing Play, confirm the instance name, Minecraft version and loader. If you maintain several packs, give each profile a distinct name.
If your launcher has two installations with similar names, open the folder for the selected one. Its mods folder should contain the JAR you just downloaded. Rename the launcher profile to include the pack name and game version if you often switch between them.
YetAnotherConfigLib FAQ
What is YACL?
YetAnotherConfigLib gives Minecraft mods a way to display and save settings. Players install it when a mod includes YACL among its requirements.
Why does my mod need YACL?
The mod author used the library for part of the mod. Your loader checks for that library when the profile starts and reports a missing dependency if it cannot find it.
Which file should I choose?
Match the full Minecraft version and loader in the finder. If the error names a YACL version range, choose a release within that range.
Where is my game version listed?
Check the installation or instance settings in your launcher. Use the Minecraft version for that instance, including the last digit of the patch number.
How do I identify my loader?
Open the profile you use to start the pack. Look for the loader name, such as Fabric or NeoForge, in its version or instance details.
Where does the JAR go?
Copy the downloaded JAR into the active profile’s mods folder. Keep it as one file and restart the game after copying it.
Can my launcher install YACL?
Yes, if your launcher has a mod browser. Select your instance before installing, so the launcher adds the library to the right pack.
How can I verify installation?
Check the loaded mods list if your setup provides one. You can also search latest.log in the instance’s logs folder for the library name.
Does my modpack include YACL?
Open the pack’s installed mods list and search for YACL or YetAnotherConfigLib. If it already contains the required build, keep the pack’s copy.
Where are my mod settings?
Start with the settings entry for the mod you want to change. Some mods use a configuration button in a mod list, while others provide their own menu.
Why does the loader report a missing dependency?
The loader could not find a required library that meets the mod’s conditions. Read the library name and version range in the same message.
What causes a version mismatch?
The file may match your loader but target another Minecraft version. Also compare the YACL release number with the range the dependent mod accepts.
Why is the file undetected?
Check the active instance path and file extension. A JAR in Downloads, a different pack or an extra nested folder can escape the loader’s scan.
How do I update YACL?
Back up your instance and close the game. Replace the old JAR with a compatible build, then reopen the settings screen to test it.
Where are older releases?
Use the release dropdown in the download finder. Select the correct game and loader first to see the older builds for that combination.
Where can I read release notes?
The Release notes section explains what to check before updating. The release history link in the footer lists the publisher’s notes for individual builds.